Bölümümüz Öğretim Elemanlarının Bazı Akademik Yayınları

Taştan, K. (2020). “Critical submergence for a horizontal pipe intake”. Ain Shams Engineering Journal, 11(4) (DOI: 10.1016/j.asej.2020.02.010) https://www.sciencedirect.com/science/article/pii/S2090447920300435

Eroğlu, N., Taştan, K. (2020). “Local Energy Losses for Wave-Type Flows at Abrupt Bottom Changes”. Journal of Irrigation and Drainage Engineering, 146(9), 04020029 (DOI: 10.1061/(ASCE)IR.1943-4774.0001498) https://ascelibrary.org/doi/abs/10.1061/%28ASCE%29IR.1943-4774.0001498

Taştan, K., Yıldırım, N. (2018). “Effects of intake geometry on the occurence of a free surface vortex”. Journal of Hydraulic Engineering, 144(4), 04018009. (DOI: 10.1061/(ASCE)HY.1943-7900.0001439) https://ascelibrary.org/doi/full/10.1061/%28ASCE%29HY.1943-7900.0001439

Taştan, K. (2018). “Prediction of critical submergence in a two-layer-stratified fluid flow”. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40, 181. (DOI: 10.1007/s40430-018-1112-x) https://link.springer.com/article/10.1007/s40430-018-1112-x

Taştan, K. (2017). “Scale and flow boundary effects for air-entraining vortices”. Proceedings of the Institution of Civil Engineers-Water Management, 170(4), 198-206. (DOI: 10.1680/jwama.15.00118) https://www.icevirtuallibrary.com/doi/abs/10.1680/jwama.15.00118

Taştan, K., Yıldırım, N. (2017). “Effective intake for critical submergence in the case of more than one intake”. KSCE- Journal of Civil Engineering, 21(3), 1004-1008. (DOI: 10.1007/s12205-016-0073-9) https://link.springer.com/article/10.1007/s12205-016-0073-9

Ozdemir O.N., Buyruk T., Ucaner E. "Calculation of Chlorine and Fluoride Diffusion/Dispersion Coefficients in Water Supply Pipes" J. Water Resour. Plann. Manage., 2021, 147(7): 04021041

Ozdemir, O. & Buyruk, T, 2018. Effect of Travel Time and Temperature on Chlorine Bulk Decay in Water Supply Pipes. J. Environ. Eng., /10.1061/(ASCE)EE.1943-7870.0001321.

Anıl, Ö., Togay, A., Karagöz, Ü., Döngel, N., Söğütlü, C., “Effect of Timber Type and Nail Spacing on the Hysteretic Behavior of Timber Framed Shear Walls With Openings”, Springer, International Journal of Civil Engineering, Vol. 16, No. 6, pp. 629-646, 2018.

 Uzel, M., Togay, A., Anil, Ö., Söğütlü, C., “Experimental Investigation of Flexural Behavior of Glulam Beams Reinforced with Different Bonding Surface Materials”, Elsevier Science, Construction and Building Materials, Vol. 158, pp. 149-163, 2018.

 Yıldırım, G., Sarwary, M.H., Al-Dahawi, A., Öztürk, O., Anil, Ö., Şahmaran, M., “Piezo-resistive Behavior of CF- and CNT-based Reinforced Concrete Beams Subjected to Static Flexural Loading: Shear Failure Investigation”, Elsevier Science, Construction and Building Materials, Vol. 168, pp. 266-279, 2018.

 Anıl, Ö., Erdem, R.T., Tokgöz, M.N., “Investigation of Lateral Impact Behavior of RC Columns”, Techno Press, Computers and Concrete, Vol. 22, No. 1, pp. 123-132, 2018.

Yılmaz, T., Kıraç, N., Anil, Ö., Erdem, R.T., Sezer, C., “Low Velocity Impact Behaviour of RC Two Way Slab Strengthening with CFRP Strips”, Elsevier Science, Construction and Building Materials, Vol: 186, pp. 1046-1063, 2018.

Kaya, F., Tekeli, H., Anil, Ö., “Experimental behavior of strengthening of masonry infilled reinforced concrete frames by adding rebar-reinforced stucco”, Wiley, Structural Concrete, Vol. 19, No. 6, pp. 1792-1805, 2018.

Yılmaz, T., Anil, Ö., Kıraç. N., “An Alternative Evaluation of the Lateral-Torsional Buckling Behavior of Mono-symmetric Beam-Columns”, Technopress, Steel and Composite Structures, Vol. 30, No.5, pp. 471-481, 2019.

 Yılmaz, T., Arslan, B., Anil, Ö., “Non-Linear FEA of Mechanical Anchorages on CFRP-to-Concrete Bonded Joint”, ICE Publishing, Magazine of Concrete Research, Vol 71, No. 9, pp. 488-502, 2019.

Sakin, S., Anil, Ö., Ghoroubi, R., Mercimek, Ö., “Nonlinear FE Analysis on Bonding Strength of Concrete Strengthened with Anchored CFRP Strip”, ICE Publishing, Proceedings of the Institution of Civil Engineers: Structures and Buildings, Vol 172, No. 6, pp. 437-450, 2019.

Banyhussab, Q.S., Yıldırım, G., Anil, Ö., Erdem, R.T, Ashour, A.F., Şahmaran, M., “Impact Resistance of Deflection-Hardening Fiber Reinforced Concrete with Different Mixture Parameters”, Wiley, Structural Concrete, Vol. 20., No. 3, pp. 1036-1050, 2019.

Sarwary, M.H., Yıldırım, G., Al-Dahawi, A., Anil, Ö., Khiawi, K. A., Toklu, K., Şahmaran, M., “Self-Sensing of Flexural Damage in Large-Scale Steel-Reinforced Mortar Beams”, ACI, American Concrete Institute, Materials Journal, Vol. 116, No. 4, pp. 209-221, 2019.

Yılmaz, T., Kıraç, N., Anil, Ö., “Experimental Investigation of Axial Loaded RC Square Column Subjected to Low Velocity Impact Loading”, Wiley, Structural Concrete, Vol. 20, No.4., pp. 1358-1378, 2019.

Khakzad, F., Tüzemen, Ç., Salamcı, E., Anil, Ö.,” The effects on the flexural strength and impact behavior of nanographene ratio of the glass fiber nanocomposite plates”, Wiley, Polymer Engineering & Science, Vol. 59, No. 10., pp. 2082-2091, 2019.

 Sakin, S., Anil, Ö., “Non Linear Finite Element Model for Interface between Anchoraged Carbon Fiber Reinforced Polymer and Concrete Surface”, Wiley, Structural Concrete, Vol. 20., No. 6., pp. 1986-1999, 2019.

Işık, A., Gürbüz, A., Anil, Ö., “Assessment of soil-geocell interaction behavior by laboratory pullout tests”, Journal of The Faculty of Engineering and Architecture of Gazi University, Vol. 35, No. 1., pp. 27-38, 2020.

Yılmaz, T., Kıraç, N., Anil, Ö., Erdem, R.T., Kaçaran, G., “Experimental Investigation of Impact Behaviour of RC Slab with Different Reinforcement Ratios”, Springer, KSCE Journal of Civil Engineering, Vol. 24., No. 1., pp. 241-254, 2020.

Çatı, Y., Gökçeli, S., Anil, Ö., Korkmaz, C.S., “Experimental and Numerical Investigation of USP for Optimization of Transition Zone”, Elsevier Science, Engineering Structures, Vol. 209, 109971, 2020

Demirhan, A.L., Eroğlu, H.E., Mutlu, E.O., Yılmaz, T., Anil, Ö., “Experimental, Analytical and Numerical Investigation of Lateral Torsional Buckling Behavior of IPE Type Steel Beam”, Elsevier Science, Journal of Constructional Steel Research, Vol. 168, 105991, 2020.

Yıldırım, G., Khawi, F.E., Anil, Ö., Şahin, O., Şahmaran, M., Erdem, R.T., “Performance of Engineered Cementitious Composites under Drop-weight Impact: Effect of Different Mixture Parameters”, Wiley, Structural Concrete, Vol. 21, No. 3, pp. 1051-1070, 2020.

Anıl, Ö., Yılmaz, M.C., Barmaki, W., “Experimental and Numerical Investigation of Reinforced Concrete Columns Subjected to Lateral Low Velocity Impact Loading”, ICE Publishing, Proceedings of the Institution of Civil Engineers: Structures and Buildings, Vol. 173, No. 8., pp. 549-567, 2020.

Demirhan, S., Yıldırım, G., Banyhussab, Q.S., Koca, K., Anil, Ö., Erdem, R.T., Şahmaran, M., “Impact Behavior of Nano-modified Deflection-hardening Fiber Reinforced Concretes”, ICE Publishing, Magazine of Concrete Research, Vol. 72, No. 17, pp. 865-887, 2020.

Ghoroubi, R., Mercimek, Ö., Özdemir, A., Anil, Ö., “Experimental Investigation of Damaged Square Short RC Columns with Low Slenderness Retrofitted by CFRP Strips Under Axial Load”, Elsevier Science, Structures, Vol. 28, pp. 170-180, 2020.

Anıl, Ö., Ulusoy, B., “Nonlinear Finite Element Analyses of Punching Shear Behavior of Two Way RC Slabs with Openings”, Springer, Iranian Journal of Science and Technology: Transactions of Civil Engineering, Vol. 44, pp. 1109-1124, 2020.

Sakin, S., Anil, Ö., Uzel, M., Togay, A., “Investigation of Bond Slip Model of Timber to Timber Bonded Joint Strengthened with Different Net Type”, Taylor & Francis, Mechanics Based Design of Structures and Machines, An International Jour

C Tang, KK Phoon, DQ Li, SO Akbas, “Expanded Database Assessment of Design Methods for Spread Foundations under Axial Compression and Uplift Loading

Journal of Geotechnical and Geoenvironmental Engineering 146 (11), 04020119, 2020            

D Anafarta, E Turk, SO Akbas “The importance of designer-contractor communication in geotechnical design as exemplified by a cut slope failure” IOP Conference Series: Materials Science and Engineering 800 (1), 012004, 2020

E Tekin, SO Akbas,  “Predicting groutability of granular soils using adaptive neuro-fuzzy inference system”, Neural Computing and Applications 31 (4), 1091-1101, 2019

YB Sonmezer, S Bas, NS Isik, SO Akbas, “Linear and nonlinear site response analyses to determine dynamic soil properties of Kirikkale”, Geomechanics and Engineering 16 (4), 435-448, 2018

YB Sonmezer, S Bas, SO Akbas,  “Seismic risk estimation of the Kirikkale province through street survey based rapid assessment method (SSRA)” Earthquakes and Structures 14 (6), 615-626, 2018

YB Sonmezer, I Kalkan, S Bas, SO Akbas,  “Effects of the use of the surface spectrum of a specific region on seismic performances of R/C structures”, Natural Hazards, 2018

G Babagiray, SO Akbas, “A Numerical Modelling Based Parametric Study on the Bearing Capacity of Shallow Foundations on Cohesionless Soils Underlain by a Shallow Rigid Layer” TEKNIK DERGI 29 (1), 8185-8198, 2018

Behavior and strength of hidden Rc beams embedded in slabs”, By: Ozbek, Eray ;  Aykac, Bengi;  Bocek, Meryem;  Yilmaz, Mahmut Cem;  Mohammed, A. B. Khadeeja;  Er, Sule Bakirci;  Aykac, Sabahattin; JOURNAL OF BUILDING ENGINEERING, Volume: 29,Article Number: 101130, DOI: 10.1016/j.jobe.2019.101130, Published: MAY 2020.

“The effects of brick walls strengthened with perforated steel plates on frame behavior”, By: Ozbek, Eray; Aykac, Bengi; Aykac, Sabahattin; ENGINEERING STRUCTURES, Volume: 189, Pages: 62-76, DOI: 10.1016/j.engstruct.2019.03.080, Published: JUN 15 2019.

“Recommendations for calculation of strengthened brick walls with perforated plates”, By: Ozbek, Eray; Aykac, Bengi; Can, Husnu; Kalkan, Ilker ; Aykac, Sabahattin; JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, Volume: 34, Issue: 1, Pages: 1-15, DOI: 10.17341/gazimmfd.416422, Published: 2019.

“Behavior of Postfabricated RC Beams under Monotonic Transverse Loading”, By: Aykac, Sabahattin; Jamal, Rohullah; Ozbek, Eray; Kalkan, Ilker; Aykac, Bengi; JOURNAL OF STRUCTURAL ENGINEERING, Volume: 145, Issue: 1, Article Number: 04018223, DOI: 10.1061/(ASCE)ST.1943-541X.0002220, Published: JAN 2019.

“Discussion on "Seismic capacity of masonry infilled RC frame strengthening with expanded metal ferrocement" by A. Leeanansaksiri, P. Panyakapo, A. Ruangrassamee [Eng. Struct. 159 (2018) 110-127]”, By: Aykac, Sabahattin; Ozbek, Eray; Kalkan, Ilker; Aykac, Bengi; ENGINEERING STRUCTURES, Volume: 171, Pages: 928-932, DOI: 10.1016/j.engstruct.2018.03.014, Published: SEP 15 2018.

“Seismic strengthening of infill walls with perforated steel plates”, By: Aykac, Bengi; Ozbek, Eray; Babayani, Rahim; Baran, Mehmet; Aykac, Sabahattin; ENGINEERING STRUCTURES, Volume: 152, Pages: 168-179, DOI: 10.1016/j.engstruct.2017.09.015, Published: DEC 1 2017.

Baduna Kocyigit M, Kocyigit O, Akay H, Demir G (2020), Experimental Investigation of the Effect of Skew Angle on Partially or Fully Submerged Deck Scour, Canadian Journal of Civil Engineering, 47(9): 1027-1036. Erişim linki: https://cdnsciencepub.com/doi/full/10.1139/cjce-2019-0121

Akay H, Baduna Kocyigit M (2020), Flash flood potential prioritization of sub-basins in an ungauged basin in Turkey using traditional multi-criteria decision-making methods, Soft Computing, 24(18): 14251–14263. Erişim linki: https://link.springer.com/article/10.1007/s00500-020-04792-0

Akay H, Baduna Kocyigit M (2020), Hydrologic Assessment Approach for River Bridges in Western Black Sea Basin, Turkey, Journal of Performance of Constructed Facilities, 34(1):04019090. Erişim linki: https://ascelibrary.org/doi/abs/10.1061/(ASCE)CF.1943-5509.0001372

Akay H, Baduna Kocyigit M, Yanmaz AM (2019), Development of a Safety-Inspection Method for River Bridges in Turkey, Water, 11(9):1902. Erişim linki: https://www.mdpi.com/2073-4441/11/9/1902

Baduna Kocyigit M, Akay H (2018), Estimation of potential flash flood risk in a basin using morphometric parameters: A case study of Akcay Basin, Journal of the Faculty of Engineering and Architecture of Gazi University, 33(4):1321-1332. Erişim linki: https://dergipark.org.tr/en/pub/gazimmfd/issue/41303/416429

Akay H, Baduna Koçyigit M, Yanmaz AM (2018), Effect of using multiple stream gaging stations on calibration of hydrologic parameters and estimation of hydrograph of ungauged neighbouring basin, Arabian Journal of Geosciences, 11(11):282. Erişim linki: https://link.springer.com/article/10.1007/s12517-018-3642-z

Bayraktar, O.Y., Citoglu, G.S., Belgin, Ç.M., Cetin,S., Cetin, M. “Investigation of Effect of Brick Dust and Silica Fume on the Properties of Portland Cement Mortar”, FEB- Fresenius Environmental Bulletin, vol.28, No 11/2019, pp.7823-7832, November 2019.

Bayraktar, O.Y., Citoglu, G.S., Belgin, C.M., Cetin, M. “Investigation of the Mechanical Properties of Marble Dust and Silica Fume Substituted Portland Cement Samples Under High Temperature Effect”, FEB- Fresenius Environmental Bulletin, vol.28, No 5/2019, pp.3865-3875, Mayıs 2019.

Efe Barbaros, Ismail Aydin, Kutay Celebioglu “Feasibility of pumped storage hydropower with existing pricing policy in Turkey” Volume 136, February 2021, 110449, https://doi.org/10.1016/j.rser.2020.110449

Yünkül, K., & Gürbüz, A. (2020). Uplift behavior of shallow horizontal plate anchors reinforced with geocells in cohesionless soil. European Journal of Environmental and Civil Engineering, 1-24. (Article in press)

Behavior and strength of hidden Rc beams embedded in slabs”, By: Ozbek, Eray ;  Aykac, Bengi;  Bocek, Meryem;  Yilmaz, Mahmut Cem;  Mohammed, A. B. Khadeeja;  Er, Sule Bakirci;  Aykac, Sabahattin; JOURNAL OF BUILDING ENGINEERING, Volume: 29,Article Number: 101130, DOI: 10.1016/j.jobe.2019.101130, Published: MAY 2020.